 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MASW-000823-12770T HMICTM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications Features * * * * * * * * Exceptional Tx Loss = 0.35 dB Avg @ 2025 MHz, 20mA Exceptional Rx Loss = 0.50 dB Avg @ 2025 MHz, 20mA Higher Tx-Rx Isolation = 31dB Avg @ 2025 MHz, 20mA Higher RF C.W. Input Power =13 W C.W.(Tx-Ant Port) Higher RF Peak Power =+49.5 dBm, 5uS P.W.,1 % duty Higher IIP3=64 dBm (Tx-Ant Port ) Lower EVM (OFDM): < 1.5 % @13W Pinc, (Tx-Ant Port) Surface Mount 3mm MLP Package, RoHS* Compliant Rev. V5 Functional Diagram (TOP VIEW) PIN14 Description and Applications The MA-COM MASW-000823-12770T is a SP2T, High Peak and Average Power, High Linearity, Common Anode, PIN diode LNA Protect Switch for TD-SCDMA(2010-2025 MHz) applications. The device is provided in industry standard 3mm MLP plastic packaging. This device incorporates a PIN diode die fabricated with M/A-COM's patented Silicon-Glass HMICTM process. This chip features two silicon pedestals embedded in a low loss, low dispersion glass. The diodes are formed on the top of each pedestal. The topside is fully encapsulated with silicon nitride and has an additional polymer passivation layer. These polymer protective coatings prevent damage and contamination during handling and assembly. This compact SP2T PIN diode switch in 3mm MLP package, offers extraordinary performance with excellent isolation to loss ratio for both Tx and Rx states. The SP2T provides outstanding 13 W C.W. power handling coupled with 64 dBm IIP3 for maximum switch performance. PIN 3 PIN10 0 Circuit Side View PIN1 PIN IDENTIFIER PIN 16 PIN Configuration: (Center Metal Area is RF, D.C., and Thermal Ground) PIN 1 2 3 4 Function N/C N/C Tx N/C N/C N/C N/C N/C PIN 9 10 11 12 13 14 15 16 Function N/C Rx N/C N/C N/C Ant N/C N/C Absolute Maximum Ratings Parameter Forward Current Reverse Voltage ( RF & D.C. ) Operating Temperature Storage Temperature Junction Temperature Tx Incident C.W. Power Tx Peak Incident Power With 3.0:1 Maximum Ant VSWR Mounting Temperature 1 @ TA = +25 C (unless otherwise specified) Absolute Maximum | 200 mA | | -130 V | -40 C to +85 C -55 C to +150 C +175 C 13 W C.W. 90 W, 5 uS P.W., 1% Duty +235 C for 10 seconds 5 6 7 8 Ordering Information Part Number MASW-000823-12770T Package Tape and Reel 1. Exceeding these limits may cause permanent damage. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000823-12770T HMICTM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications Electrical Specifications at +25C, Characteristic Impedance, Zo = 50 Parameter F = 2010- 2025 MHz Insertion Loss, Tx - Ant Insertion Loss, Ant - Rx Isolation, Tx - Rx Isolation, Rx - Tx Tx Input Return Loss Rx Input Return Loss Tx IL Rx IL Rx ISO Tx ISO Tx RL Rx RL Tx IP0.1dB Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA, Pinc= 0 dBm, Tx-Ant Rx = +5.0 V@ +22mA, Tx =+28V @ 0mA, Pinc= 0 dBm, Ant-Rx Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA, Pinc= 0 dBm, Tx-Rx Rx = +5.0 V@ +22mA, Tx =+28V @ 0mA, Pinc= 0 dBm, Rx-Tx Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA, Pinc= 0 dBm, Tx-Ant Rx = +5.0 V@ +22mA, Tx =+28V @ 0mA, Pinc= 0 dBm, Rx-Ant 2.010 GHz, Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA Tx To Antenna 2.010 GHz, Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA Tx To Antenna Fo=2.010 GHz, Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA Pin = + 30 dBm, Tx To Antenna Fo= 2.010 GHz, Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA Pin = + 30 dBm, Tx To Antenna Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA Pi= +10dBm, F1 = 2.010 GHz, F2 = 2.025 GHz, Tx To Antenna Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna ( 5 S RF Pulse Width, 1% Duty , 3.0:1 Ant VSWR ) Rx = +5.0 V@ +22mA, Tx =+28V @ 0mA F = 2.010 GHz, Antenna to Rx ( 10% - 90% RF Voltage) Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA F = 2.010 GHz, Tx To Antenna 1MHz Rep Rate in Modulating Mode Tx = +5.0 V@ +22mA, Rx =+28V @ 0mA Pinc = +41.1 dBm, Tx-Ant dB dB dB dB dB dB 28.5 24.5 0.35 0.50 31 26 33 36 0.50 0.70 Rev. V5 Symbol Conditions Units Min Typ Max Tx Input P0.1dB dBm 40 Tx Input P1dB Tx IP1dB dBm > 45 Tx 2nd Harmonic Tx 2Fo Tx 3Fo dBc 63 Tx 3rd Harmonic dBc 80 Tx Input Third Order Intercept Point Tx IIP3 dBm 64 Tx C.W. Input Power Tx cwPinc dBm 41.1 Tx Peak Input Power Tx pkPinc dBm 49.5 Rx C.W. Input Power Rx cwPinc RF dBm 33 Tx RF Switching Speed s 1 Tx EVM (OFDM) QAM 64 EVM % 1.5 2 ESD Rating : These devices are rated at Class 1B Human Body ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000823-12770T HMICTM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications Typical Performance Curves @ +25C Tx Insertion Loss (Bias Conditions: 10 mA and 20 mA for Low Loss, 27 V Back Bias for Isolation Port) MASW-000823-12770T Tx-Ant Insertion Loss vs Frequency and Current -0.200 Tx Loss_10 mA Tx Loss_20 mA -0.240 Rev. V5 -0.220 -0.260 -0.280 Loss ( dB ) -0.300 -0.320 -0.340 -0.360 -0.380 -0.400 2010.0 2013.0 2016.0 F ( MHz ) 2019.0 2022.0 2025.0 Rx Insertion Loss (Bias Conditions: 10 mA and 20 mA for Low Loss, 27 V Back Bias for Isolation Port) MASW-000823-12770T Ant-Rx Insertion Loss vs Frequency and Current -0.400 -0.440 -0.480 -0.520 -0.560 Loss ( dB ) -0.600 -0.640 -0.680 -0.720 Rx Loss_10 mA Rx Loss_20 mA -0.760 -0.800 2010.0 2013.0 2016.0 F ( MHz ) 2019.0 2022.0 2025.0 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000823-12770T HMICTM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications Typical Performance Curves @ +25C Tx & Rx Return Loss (Bias Conditions: 20 mA for Loss, 27 V Back Bias for Isolation Port) Tx & Rx Return Loss vs Frequency -30.000 Rev. V5 -31.000 -32.000 -33.000 -34.000 R.L. ( dB ) -35.000 -36.000 -37.000 -38.000 Tx RL_20 mA Rx RL_20 mA -39.000 -40.000 2.010 2.013 2.016 F ( GHz ) 2.019 2.022 2.025 Tx-Rx & Rx-Tx Isolation (Bias Conditions: 20 mA for Loss, 27 V Back Bias for Isolation Port) Tx - Rx & Rx-Tx Isolation vs Frequency -25.00 -26.00 -27.00 -28.00 Isolation ( dB ) -29.00 Rx-Tx Isol_20 mA Tx-Rx Isol_20 mA -30.00 -31.00 -32.00 -33.00 -34.00 -35.00 2010.0 2013.0 2016.0 2019.0 2022.0 2025.0 F ( MHz ) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000823-12770T HMICTM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications Rev. V5 Notes: 1. Data is taken on M/A-COM evaluation board 1000029181-0000001 @ 25C by removing peripheral board losses ( connectors, transmission line, and bias elements ). 2. MA-COM PIN Diode Driver, MADR-008888-0001TR, Operating with +5V and + 28V, is recommended for usage with the MASW-000823-12770T SP2T Switch. 3. Typical PIN Diode Forward Voltage = + 0.9 V @ + 22 mA for Insertion Loss. Typical PIN Diode Reverse Voltage = 28 V - 1.0 V = 27 V for Isolation (See Bias Schematic ). 4. Switch is Asymmetrical, + 41.1 dBm RF C.W. Input Power Applies to Tx Port Only. 5. Center Ground Area of MLP 3mm Package must be Attached to Thermal Ground for Optimum RF Power Performance. Assembly Note: A typical profile for a Sn 60/ Pb 40 Soldering process is provided in Application Note, " M538, Surface Mounting Instructions " on the MA-COM website, www.macom.com TTL Driver and SP2T Schematic with +5V, + 28V D.C. Power 2,3,4,5 2. 3. 4. 5. Forward Bias Diode Voltage, Vf @ 22 mA = + 0.9 V. Reverse Bias Diode = | - ( +28 V - +1.0 V ) | = | - 27 | V. Nominal FET Low Output Voltage, Vds ~ + 0.1 V @ 22 mA. MA-COM PIN Diode Driver, MADR-008888-0001TR, is recommended for usage with the MASW-000823-12770T SP2T Switch. D.C. Bias to RF Truth Table RF State Low Loss Tx-Ant & Isolation Tx-Rx 5 Low Loss Ant-Rx & Isolation Rx-Tx TTL Logic & D.C. Supply Conditions TTL = 1 + 5V @ 22 mA ( Tx ), + 28V @ 0 mA ( Rx ) TTL = 0 + 5V @ 22 mA ( Rx ), + 28V @ 0 mA ( Tx ) Voltage at Common Anode + 1.0 V + 1.0 V ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASW-000823-12770T HMICTM PIN Diode SP2T 13 Watt Switch for TD-SCDMA Applications MASW-000823-12770T Outline - 3mm FQFP-N 16 Lead Saw Singulated Rev. V5 ANT Port PIN 14 TX Port TX Port PIN 3 PIN 3 RX Port PIN 10 ANT Port PIN 14 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MASW-000823-12770T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |